Typical Enabling Conditions
All:
TYPICAL ENABLING CONDITIONS SPECIFICATION TABLE (All)
| The monitor will run whenever this DTC is not present | See LIST OF DISABLE A MONITOR |
ECT Sensor Stuck at Low ECT:
TYPICAL ENABLING CONDITIONS SPECIFICATION TABLE (ECT SENSOR STUCK AT LOW ECT)
| Cumulative idle off period | 250 seconds or more |
| Speed increase by 30 km/h (18.6 mph) or more | 10 times or more |
TYPICAL ENABLING CONDITIONS SPECIFICATION TABLE (ECT SENSOR STUCK AT LOW ECT)
| ECT | 35 to 60°C (95 to 140°F) |
| IAT | -6.7°C (20°F) or more |
ECT Sensor Stuck at High ECT:
TYPICAL ENABLING CONDITIONS SPECIFICATION TABLE (ECT SENSOR STUCK AT HIGH ECT)
| ECT | 60°C (140°F) or more |
| IAT | -6.7°C (20°F) or more |
| "Stop and go"*1 | Once or more |
| "Steady driving and stop"*2 | Once or more |
HINT:
*1: Vehicle is stopped for 20 seconds or more and accelerated to more than 70 km/h (43.5 mph) within 40 seconds.
*2: Vehicle is driven by 65 km/h (40.4 mph) or more for 30 seconds or more and the vehicle speed reaches 43.5 mph (70 km/h). The vehicle is decelerated from 65 km/h (40.4 mph) to 3 km/h (1.86 mph) or less within seconds and stopped for 10 seconds.