| Base,In-Line4,4WD,5 Spd Trans | | 4.3 | | C |
| Combination Procedure: CLUTCH PRESSURE PLATE: Remove & Replace: |
| | 0.3 | | C |
| Combination Procedure: CLUTCH RELEASE BEARING: Remove & Replace: |
| | 0.2 | | C |
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: |
| Rear | | 0.7 | | B |
| Combination Procedure: EXTENSION HOUSING SEAL: Remove & Replace: |
| | 0.2 | | B |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| | 0.5 | | C |
| Combination Procedure: INPUT SHAFT BEARING: Remove & Replace: |
| Base,In-Line4,5 Spd Trans, Front | | 1.8 | | A |
| Combination Procedure: TRANSFER CASE ASSEMBLY: Overhaul: |
| | 4.8 | | A |
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: |
| | 0.4 | | C |