Service Data
Driveshaft/Propeller Shaft Service Data
| PROPELLER SHAFT ASSY FRONT | ||
| Propeller shaft runout | Maximum: | 0.6 mm (0.024 in.) |
| Universal joint spider bearing axial play | Maximum: | 0 to 0.05mm (0 to 0.002 in.) |
| PROPELLER SHAFT ASSY | ||
| Propeller shaft runout | Maximum: | 0.6 mm (0.024 in.) |
| Propeller w/center bearing shaft runout | Maximum: | 0.6 mm (0.024 in.) |
| Universal joint spider bearing axial play | Maximum: | 0 to 0.05mm (0 to 0.002 in.) |
| FRONT AXLE HUB SUB-ASSY | ||
| Front axle hub backlash | Maximum: | 0.05 mm (0.0020 in.) |
| Front axle hub deviation | Maximum: | 0.05 mm (0.0020 in.) |
| FRONT DRIVE SHAFT LH (4WD) | ||
| Outboard joint boot grease capacity | 260 to 280 g (9.2 to 9.9 oz.) | |
| Outboard joint boot clamp clearance | 1.0 to 5.0 mm (0.039 to 0.197 in.) | |
| Front drive inboard joint boot grease capacity | 182 to 202 g (6.4 to 7.1 oz.) | |
| Front drive inboard joint boot clamp clearance | 1.0 to 4.0 mm (0.039 to 0.157 in.) | |
| Front drive shaft standard length | 486.4 ± 2.0 mm (19.149 ± 0.078 in.) | |
| REAR AXLE SHAFT LH | ||
| Rear axle shaft backlash | Maximum: | 0.05 mm (0.0020 in.) |
| Rear axle shaft deviation | Maximum: | 0.05 mm (0.0020 in.) |
| Rear axle shaft runout | Maximum: | 1.5 mm (0.0591 in.) |
| Rear axle shaft flange runout | Maximum: | 0.05 mm (0.0020 in.) |