Acc Cut Relay: Inspection

REMOVE ACC CUT RELAY

INSPECT ACC CUT RELAY

Using an ohmmeter, check for continuity between each terminal.

Specified condition:

TERMINAL NUMBER AND SPECIFIED CONDITION

Terminal No.	Specified condition
1-2 3-4	Continuity
3-5	No continuity

Using an ohmmeter, check for continuity between terminals 3 and 5 when the battery voltage is applied across terminals 1 and 2.

Fig 1: Checking Continuity Between Terminals 3 And 5
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Specified condition: Continuity

INSTALL ACC CUT RELAY