Torque Specification
TIGHTENING TORQUE SPECIFICATION (TRANSFER)
| Part Tightened | N.m | kgf.cm | ft.lbf | |
|---|---|---|---|---|
| Transfer case lower protector x Transfer | 18 | 184 | 13 | |
| Transfer x Transfer adaptor | 24 | 240 | 17 | |
| Front bearing retainer sub-assy x Front case | 11.5 | 117 | 8 | |
| Transfer case cover sub-assy x Front case | 18 | 185 | 13 | |
| Output shaft companion flange sub-assy lock nut | 118 | 1,200 | 87 | |
| Extension housing sub-assy rear x Case rear | 12 | 120 | 9 | |
| Front case x Case rear | 28 | 285 | 21 | |
| Gear shift fork No.2 x Transfer shift actuator assy | 24 | 245 | 18 | |
| Shift shaft stopper x Case rear | (VF4AM) | 19 | 195 | 14 |
| CTR differential lock fork sub-assy x Transfer shift actuator assy | 24 | 245 | 18 | |
| Transfer shift actuator assy x Case rear | 20 | 200 | 14 | |
| Case No.1 plug (Filler plug) x Case rear | 37 | 380 | 27 | |
| Case No.1 plug (Drain plug) x Case rear | 37 | 380 | 27 | |
| Oil separator sub-assy x Case rear | 7.8 | 80 | 69 in..lbf | |
| Oil pump body sub-assy x Case rear | 7.8 | 80 | 69 in..lbf | |
| Transfer case plug x Front case | 18.6 | 190 | 14 | |