Inspection Procedure

CHECK DTC OUTPUT
1. Delete the DTCs (See DATA LIST / ACTIVE TEST ).
2. Check for DTCs again.
  HINT:
  
  If the engine does not start, check for DTC B2273, B2275, B2278, B2284, B2285, B2287, B2288 and B2289. (For details, see the "DTC check and clear" See DTC CHECK / CLEAR .)
  
  OK:
  
  No DTC is output.
NG: GO TO DTC CHART

OK: GO TO CRANKING HOLDING FUNCTION CIRCUIT