Torque Specifications
WARNING: This page is about a different car, the 2006 Toyota Camry Solara. However, it is still accessible from the selected car via links, so may be relevant.
3MZ-FE FUEL TORQUE SPECIFICATIONS
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Fuel delivery pipe sub-assembly at Intake manifold | 10 | 102 | 7 |
| Fuel delivery pipe No.2 at Intake manifold | 10 | 102 | 7 |
| Fuel pipe No.2 union bolt at Fuel delivery pipe No.2 | 33 | 331 | 24 |
| Fuel pressure pulsation damper assembly at Fuel delivery pipe sub-assembly | 33 | 331 | 24 |
| Fuel pipe sub-assembly No.1 at Intake manifold | 20 | 199 | 14 |
| Surge tank stay No.2 at Intake air surge tank | 20 | 199 | 14 |
| Surge tank stay No.2 at Cylinder head | 20 | 199 | 14 |
| Surge tank stay No.1 at Intake air surge tank | 20 | 199 | 14 |
| Surge tank stay No.1 at Cylinder head | 20 | 199 | 14 |
| Engine hunger No.1 at Intake air surge tank | 20 | 199 | 14 |
| Engine hunger No.1 at Cylinder head | 20 | 199 | 14 |
| Pressure feed tube assembly at Engine hunger No.1 | 7.8 | 80 | 69 in.*lbf |
| Intake air surge tank at Intake manifold | 28 | 286 | 21 |
| Emission control valve set at Emission control valve bracket | 8.0 | 80 | 71 in.*lbf |
| Fuel tank bent tube set plate at Fuel tank assembly | 5.9 | 60 | 52 in.*lbf |
| Fuel main tube support at Fuel tank assembly | 5.4 | 55 | 48 in.*lbf |
| Fuel tank band sub-assembly No.1 RH at Body | 39 | 400 | 29 |
| Fuel tank band sub-assembly No.1 LH at Body | 39 | 400 | 29 |
| Fuel tank protector lower center at Fuel tank assembly | 5.4 | 55 | 48 in.*lbf |
| Packing brake cable assembly No.2 at Body | 5.4 | 55 | 48 in.*lbf |
| Packing brake cable assembly No.3 at Body | 5.4 | 55 | 48 in.*lbf |
| Exhaust pipe assembly center at Exhaust pipe assembly front | 56 | 571 | 41 |
| Exhaust pipe assembly center at Exhaust pipe assembly tail | 56 | 571 | 41 |
| Floor panel brace rear at Body | 20 | 199 | 14 |