Inspection Procedure
- CHECK AUTO SEARCH
- Is auto search button of the radio operating normally?
- OK: REPLACE RADIO RECEIVER ASSEMBLY
- NG: GO TO NEXT STEP
- INSPECT FUSE (RADIO)
- Remove the RADIO fuse from the cowl side junction block RH.
- Measure the resistance of the fuse.
Standard resistance: Below 1 Ω
- NG: REPLACE FUSE
- OK: GO TO NEXT STEP
- CHECK WIRE HARNESS (RADIO RECEIVER - BATTERY)
- NG: REPAIR OR REPLACE HARNESS AND CONNECTOR
- OK: REPLACE RADIO RECEIVER ASSEMBLY