FixVault
Home › Toyota › 2006 › Land Cruiser › Repair and Diagnosis › Suspension › Suspension Control Systems › Suspension Control System › Damaging Force Control Actuator › Inspection

Damaging Force Control Actuator: Inspection

  1. INSPECT DAMPING FORCE CONTROL ACTUATOR 
    1. Disconnect the damping force control actuator connector.
    2. Measure resistance between each terminal of damping force control actuator.

      Standard resistance 

      TERMINAL CONDITION

      Terminals No. Specified Condition
      Terminals 1 and 2 12.0 to 13.6 Ω
      Terminals 2 and 3 12.0 to 13.6 Ω
      Terminals 2 and 4 12.0 to 13.6 Ω
      Terminals 2 and 5 12.0 to 13.6 Ω
      Fig 1: Measuring Resistance Between Terminal Of Damping Force Control Actuator
      G04437520Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault