Inspection Procedure

1. Check the CD.

   OK : 

   The CD is clean. 

   HINT:

   If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

   NOTE: Do not use a conventional record cleaner or anti-static preservative.

NG : CLEAN CD 

Fig 1: Cleaning CD

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

OK : GO TO NEXT STEP 

1. Check that the CD is not deformed or cracked.

   OK : 

   No deformation or cracks on the CD. 

NG : REPLACE CD 

Fig 2: Ensure CD Is Not Cracked Or Deformed

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

OK : GO TO NEXT STEP 

1. Check using another CD.
   1. Check if the problem recurs using another CD.

      OK : 

      The problem does not occur. 

OK : END 

NG : GO TO NEXT STEP 

1. Check the radio receiver installation condition.
   1. Check that the radio receiver is properly installed.

      OK : 

      Radio receiver is properly installed. 

NG : REINSTALL RADIO RECEIVER PROPERLY 

OK : REPLACE RADIO RECEIVER