Inspection Procedure

1. Turn the power switch ON (ACC).
2. Keep pressing the MAP eject switch for 5 seconds and check if the disc is ejected by forced ejection.

   OK : The disc is ejected. 

NG : PROCEED TO NEXT INSPECTION PROCEDURE SHOWN IN  PROBLEM SYMPTOMS TABLE  

OK : GO TO NEXT STEP 

1. Check that the map disc is not deformed or cracked.

   OK : No deformations or cracks on the map disc. 

NG : REPLACE MAP DISC 

Fig 1: Ensure CD Is Not Cracked Or Deformed

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

OK : END