Combination Meter: Installation

WARNING: This page is about a different car, the 2006 Toyota Matrix. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL COMBINATION METER ASSEMBLY
1. Connect the connector, then install the combination meter assembly.
  
  Fig 1: Installing Combination Meter Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Engage the 2 claws as shown in Fig 2 .
  
  Fig 2: Engaging Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Install the screw.
INSTALL METER HOOD SUB-ASSEMBLY