Terminals Of ECM
WARNING: This page is about a different car, the 2006 Toyota Matrix. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK ECM TERMINALS OF ECM
Symbols (Terminals No.) Wiring Color Terminal Description Condition Specified Condition TC (E6-20) - E1 (E3-5) P-B - BR DTC output signal Ignition switch on -> Connect terminals TC and CG of DLC3 10 to 14 V -> Below 1 V ((1)) D (E5-10) - E1 (E3-5) L - BR Clutch switch input signal Ignition switch on, depress clutch pedal -> release clutch pedal Below 1 V -> 10 to 14 V ST1- (E5-12) - E1 (E3-5) G-O - BR Cruise cancel input signal Ignition switch on, depress brake pedal -> release brake pedal Below 1 V -> 10 to 14 V STP (E5-19) - E1 (E3-5) G-W - BR Stop light switch input signal Ignition switch on, depress brake pedal -> release brake pedal 10 to 14 V -> Below 1 V CCS (E5-24) - E1 (E3-5) G-Y - BR Cruise control main switch input circuit Ignition switch on 10 to 14 V CANCEL switch held ON 6.6 to 10.1 V SET/COAST switch held ON 4.5 to 7.1 V RES/ACC switch held ON 2.3 to 4.0 V MAIN switch held ON Below 1 V SPD (E5-17) -E1 (E3-5) V-W - BR Speed signal Ignition switch on, rotate driving wheel slowly Pulse generation (See TERMINALS OF ECM ) ((2)) D (E5-10) -E1 (E3-5) L - BR D shift position switch input signal Ignition switch on, shift lever D position -> any position except D 10 to 14 V -> Below 1 V PI (E5-13) -E1 (E3-5) G-R - BR Cruise indication signal Ignition switch on, MAIN switch OFF -> MAIN switch on 10 to 14 V -> Below 1 V (1) Manual Transaxle (2) Automatic Transaxle