Amplifier Antenna: Installation

WARNING: This page is about a different car, the 2006 Toyota Matrix. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL AMPLIFIER ANTENNA ASSEMBLY
1. Set the amplifier antenna assembly to the hole on the roof, and place the antenna cord on the cutout on the antenna nut.
  
  Fig 1: Placing Antenna Cord On Cutout On Antenna Nut
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the amplifier antenna assembly with the antenna nut.
  Torque: 4.5 N*m (46 kgf*cm, 40 in.*lbf)
  
  Fig 2: Installing Amplifier Antenna Assembly With Antenna Nut
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Install the 4 clamps.
INSTALL ROOF HEADLINING ASSEMBLY
HINT:

Refer to the installation procedures of the roof headlining assembly (See REMOVAL ).
INSTALL ROOF ANTENNA POLE SUB-ASSEMBLY
INSTALL REAR SEAT CUSHION ASSEMBLY AND REAR SEATBACK ASSEMBLY