Front Shock Absorber With Coil Spring: Disposal

DISPOSE OF FRONT SHOCK ABSORBER ASSEMBLY LH
1. Fully extend the shock absorber piston rod, and clamp it in a vise at an angle.
2. Using a drill or similar tool, gradually make a hole in area A to discharge the gas inside of the absorber.
  CAUTION: As metal debris may be blown outward by the gas, you must
  - Wear protective glasses.
  - Cover the area being cut.
    NOTE: The gas is colorless and harmless.
    
    Fig 1: Discharging Gas From Inside Of Absorber (Area A)
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002