FixVault
Home › Toyota › 2006 › Sequoia Limited, 4WD › Repair and Diagnosis › Body & Frame › Windows › Windshield/Window Glass › Power Window Control System › Back Door Power Window Switch Circuit › Inspection Procedure

Inspection Procedure

  1. INSPECT BACK DOOR POWER WINDOW CONTROL SWITCH 

    NG: REPLACE BACK DOOR POWER WINDOW CONTROL SWITCH 

    OK: GO TO NEXT STEP 

  2. CHECK HARNESS AND CONNECTOR (BACK DOOR POWER WINDOW CONTROL SWITCH - MAIN BODY ECU) 

    NG: REPAIR OR REPLACE HARNESS OR CONNECTOR 

    OK: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN  PROBLEM SYMPTOMS TABLE  

About FixVault