Crankshaft Position Sensor: Installation

INSTALL CRANKSHAFT POSITION SENSOR
1. Apply a light coat of engine oil to an O-ring of the crankshaft position sensor.
2. Install the crankshaft position sensor with the bolt.
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
  
  Fig 1: Identifying Crankshaft Position Sensor Bolt
  Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
3. Connect the crankshaft position sensor connector.
INSTALL COOLER COMPRESSOR ASSEMBLY
1. Install the cooler compressor assembly with the 4 bolts.
  Torque: 25 N*m (255 kgf*cm, 18 ft.*lbf)
2. Connect the cooler compressor assembly connector.
3. Install the suction hose sub-assembly with the bolt.
  Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf)
INSTALL ENGINE UNDER COVER ASSEMBLY REAR
1. Install the engine under cover assembly rear with the 4 bolts.
  Torque: 29 N*m (296 kgf*cm, 21 ft.*lbf)
  
  Fig 2: Identifying Suction Hose Sub-Assembly Bolt
  Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
INSTALL GENERATOR ASSEMBLY (See INSTALLATION )