FixVault
Home › Toyota › 2007 › 4Runner Limited, 4.0 U, RWD › Repair and Diagnosis › Engine Performance › Engine Control System (1GR-FE) › ECM › Removal

Engine Control System (1GR-FE): ECM: Removal

  1. REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO. 2 
  2. REMOVE GLOVE COMPARTMENT DOOR SUB-ASSEMBLY 
  3. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER NO.2 
  4. REMOVE ECM 
    1. Disconnect the 5 the ECM connectors from the ECM.
    2. Remove the 3 nuts and the ECM.
    3. Remove the 2 screws and the ECM bracket No. 1 from the ECM.
      4. Fig 1: Locating ECM Bracket No. 1 Screws
      G04968687Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
    4. Remove the 2 screws and the ECM bracket No. 2 from the ECM.
About FixVault