FixVault
Home › Toyota › 2007 › 4Runner Limited, 4.7 T, AWD › Repair and Diagnosis › Engine Performance › Engine Control System (2UZ-FE) › Crankshaft Position Sensor › Installation

Crankshaft Position Sensor: Installation

  1. INSTALL CRANKSHAFT POSITION SENSOR 
    1. Install crank position sensor with bolt.

      Torque: 6.5 N*m (65 kgf*cm, 58 in.*lbf) 

    2. Reconnect the crank position sensor connector.
  2. INSTALL ENGINE UNDER COVER ASSEMBLY REAR 
    Fig 1: Locating Crankshaft Position Sensor Bolt
    G04968218Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault