FixVault
Home › Toyota › 2007 › Avalon XLS › Repair and Diagnosis › Brakes › Traction Control › Brakes - Abs › Steering Angle Sensor › Installation

Steering Angle Sensor: Installation

  1. INSTALL STEERING ANGLE SENSOR 
    1. Install the steering angle sensor to the spiral cable.
      NOTE:
      • Engage the claws securely.
      • Do not damage the claws.
      Fig 1: Identifying Steering Angle Sensor Claws
      G05001649Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSPECT SPIRAL CABLE  (See REMOVAL )
  3. PLACE FRONT WHEELS FACING STRAIGHT AHEAD 
  4. INSTALL SPIRAL CABLE  (See REMOVAL )
  5. CENTER SPIRAL CABLE  (See INSTALLATION )
  6. INSTALL STEERING WHEEL ASSEMBLY  (See INSTALLATION )
  7. INSTALL STEERING PAD  (See INSTALLATION )
  8. INSPECT STEERING PAD  (See INSTALLATION )
  9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  10. INSPECT SRS WARNING LIGHT  (See INSTALLATION )
  11. PERFORM INITIALIZATION 
    1. Some systems need initialization after reconnecting the negative battery cable.
About FixVault