Front Stabilizer Bar: Removal

1. Remove the 2 nuts and front stabilizer link assembly LH.

   HINT:

   Use a hexagon (6 mm) wrench to hold the stud if the ball joint turns together with the nut.

HINT:

Remove the RH side following the same procedures as with the LH side.

Fig 1: Locating Front Stabilizer Link Assembly LH With Nuts

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Remove the engine assembly with transaxle (See REMOVAL ).

1. Remove the 2 bolts and stabilizer bracket No. 1 LH.

Fig 2: Locating Front Stabilizer Bracket No. 1 LH With Bolts

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

HINT:

Remove the RH side following the same procedures as with the LH side.

1. Remove the 2 bushing from the stabilizer.

1. Remove the stabilizer bar front from the vehicle.