Transmission Control Cable Assembly: Removal

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (See REMOVAL )
REMOVE POSITION INDICATOR HOUSING ASSEMBLY (See REMOVAL )
REMOVE CONSOLE BOX UPPER
REMOVE CONSOLE PANEL SUB-ASSEMBLY UPPER (See REMOVAL )
REMOVE CONSOLE BOX ASSEMBLY (See REMOVAL )
REMOVE CONSOLE BOX FRONT (See REMOVAL )
REMOVE AIR BAG SENSOR ASSEMBLY CENTER (See REMOVAL )
REMOVE AIR CLEANER ASSEMBLY (See REMOVAL )
REMOVE INTAKE AIR RESONATOR SUB-ASSEMBLY (See REMOVAL )
REMOVE ENGINE UNDER COVER LH
REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY
1. Remove the 2 bolts and disconnect the shift cable grommet retainer No. 2.
  
  Fig 1: Locating Bolts And Shift Cable Grommet Retainer No. 2
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the nut from the control shaft lever.
3. Disconnect the transmission control cable assembly from the control shaft lever.
  
  Fig 2: Locating Nut And Control Shaft Lever
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Remove the clip and disconnect the transmission control cable assembly from the control cable bracket.
  
  Fig 3: Locating Transmission Control Cable Assembly Clip
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Disconnect the control cable from the control cable clamp.
  
  Fig 4: Identifying Control Cable And Control Cable Clamp
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
6. Disconnect the floor shift cable from the transmission floor shift assembly.
  
  Fig 5: Locating Floor Shift Cable
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
7. Pull out the control cable from the body.
8. Remove the shift cable grommet retainer No. 2.