FixVault
Home › Toyota › 2007 › Camry Hybrid › Repair and Diagnosis › General Information › Identification › Introduction (Hybrid) › Repair Instruction › Customize Parameters

Customize Parameters

HINT:

The following items can be customized.

NOTE:
  • When the customer requests a change in a function, first make sure that the function can be customized.
  • Be sure to make a note of the current settings before customizing.
  • When troubleshooting a function, first make sure that the function is set to the default setting.
  1. AIR CONDITIONING SYSTEM 

    AIR CONDITIONER: 

    CUSTOMIZE PARAMETERS - AIR CONDITIONER

    DISPLAY (ITEM) DEFAULT CONTENTS SETTING
    SET TEMP SHIFT (Set Temperature Shift) NORMAL To shift the temperature against the displayed temperature +2 C / +1 C / NORMAL / -1 C / -2 C
    AIR INLET MODE (Air Inlet Mode) AUTO In case of turning the A/C ON when you desire to make the compartment cool down quickly, this is the function to change the mode automatically to RECIRCULATION mode MANUAL/AUTO
    COMPRESSOR MODE (Compressor Mode) AUTO Function to turn the A/C ON automatically by pressing the AUTO button when the blower is ON and the A/C is OFF MANUAL/AUTO
    COMPRS / DEF OPER (Compressor / Air Inlet DEF Operation) LINK Function to turn the A/C ON automatically linked with the FRONT DEF button when the A/C is OFF NORMAL / LINK
    EVAP CTRL (Evaporator Control) AUTO Function to set the evaporator control to the AUTOMATIC position (AUTO) to save power, or to the coldest position (MANUAL) to dehumidify the air and to prevent the windows from fogging up MANUAL/AUTO
    FOOT/DEF MODE (Foot / DEF Auto Mode) ON Function to turn the airflow from FOOT/DEF ON automatically when AUTO MODE is ON OFF/ON
    AUTO BLOW UP (Foot / DEF Automatic Blower Up Function) ON Function to change the blower level automatically when the defroster is ON OFF/ON
    AMBIENT TMP SFT (Ambient Temperature Shift) NORMAL Function to shift the ambient temperature against the displayed ambient temperature +3 C / +2 C / +1 C / NORMAL / -1 C / -2 C / -3 C
  2. LIGHTING SYSTEM 

    ILLUMINATED ENTRY: 

    CUSTOMIZE PARAMETERS - ILLUMINATED ENTRY

    Display Default Contents Setting
    LIGHTING TIME 15s Changes the lighting time of the interior light and power switch illumination. 7.5 s/15 s/30 s
    I/L ON / UNLOCK ON Lights up the interior light and power switch illumination when a door is unlocked. ON / OFF
    I/L ON / ACC OFF ON Lights up the interior light and power switch illumination when the power switch is turned from on (ACC) to off ON / OFF

    LIGHT CONTROL: 

    CUSTOMIZE PARAMETERS - LIGHT CONTROL

    Display Default Contents Setting
    LIGHT OFF DELAY 30 s Keeps the headlights on for a certain period of time after turning the power switch off and closing all the doors with the headlights on. OFF / 30 s / 60 s / 90 s
    SENSITIVITY NORMAL Adjusts the sensitivity of the automatic light control system. *1 LIGHT 2 / LIGHT 1 / NORMAL / DARK 1 / DARK 2
    DISP EX ON SEN NORMAL Changes the ambient brightness level required to dim the lights such as the indicator lights of the combination meter, A/C indicator light, and clock. *1 LIGHT 2 / LIGHT 1 / NORMAL / DARK 1 / DARK 2
    DISP EX OFF SEN NORMAL Changes the ambient brightness level required to cancel the dimming of the lights such as the indicator lights of the combination meter, A/C indicator light, and clock. LIGHT 2 / LIGHT 1 / NORMAL / DARK 1 / DARK 2

    HINT:

    Sensitivity adjustment can hardly be confirmed. Check by driving the customer's vehicle.

    Illustration *1 

    Fig 1: Illustration *1 Chart
    G05007346Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. POWER DOOR LOCK CONTROL SYSTEM 

    DOOR LOCK: 

    CUSTOMIZE PARAMETERS - DOOR LOCK

    Display (Item) Default Contents Setting
    UNLOCK/PARK (Unlock, power switch on (IG), shift P, speed 0 km/h (0 mph)) ON Function that unlocks doors when the shift lever is moved to the P position from any other position while the power switch is on (IG) ON/OFF
    ALL UNLK/OPN-CL (All unlock, D door open-close) OFF Function that unlocks all other doors when opening driver side door within 10 seconds after turning the power switch off from on (IG) ON/OFF
    UNLK/KEY TWICE (Unlock, 2 times D key operation) ON
    • Function that unlocks only the driver side door when the driver side door key cylinder is turned to unlock once and unlocks all the doors when it is turned to unlock twice
    • In the OFF setting, turning it once unlocks all doors
    		 ON/OFF
    AUTO LOCK/SHIFT (Auto lock/shift not P) ON Function that locks doors when the shift lever is moved from the P position to any other position ON/OFF
    AUTO LOCK OFF Function that locks doors when vehicle reaches a vehicle speed 20 km/h (13 mph) ON/OFF

    WIRELESS D LOCK 

    CUSTOMIZE PARAMETERS - WIRELESS D LOCK

    Display (Item) Default Contents Setting
    AUTO LOCK DELAY 60s Function that selects AUTO LOCK time (30 sec. or 60 sec.) 30s/60s
  4. WIRELESS DOOR LOCK CONTROL SYSTEM 

    WIRELESS DOOR LOCK CONTROL SYSTEM 

    CUSTOMIZE PARAMETERS - WIRELESS DOOR LOCK CONTROL SYSTEM

    Display (Item) Default Function Setting
    TRUNK LID OPER (Wireless trunk opener function setting) 0.8 s PR ON This function changes operation method of transmitter to open luggage compartment door.
    • 1 TIME: Push once
    • 2 TIMES: Push twice
    • 0.8 s PR: Push and hold for 0.8 seconds
    • OFF: Does not operate
    		 1 TIME/2 TIMES/0.8 s PR/ OFF
    WIRELESS OPER (Wireless door lock control function) ON Function that turns wireless door lock function ON/OFF ON/OFF
    HAZARD ANS BACK (Hazard answer-back for wireless door lock control) ON
    • When the doors are locked by wireless operation, the hazard warning lights flash once.
    • When the doors are unlocked by wireless operation, the hazard warning lights flash twice.
    		 ON/OFF
    OPEN DOOR WARN (Door ajar warning) ON The buzzer sounds when LOCK is pressed when any of the doors are ajar. ON/OFF
    AUTO LOCK DELAY (Auto lock time) 60s This function regulates the interval between unlocking and automatic relocking of doors. 30 s/60 s
    UNLOCK / 2OPER (Wireless unlock operated twice) ON This function unlocks the driver's door when the UNLOCK switch is pressed once, and unlocks all doors when pressed twice within 3 seconds. If set to OFF, pressing UNLOCK once unlocks all doors. ON/OFF
    ALARM FUNCTION (Panic function) ON This function operates the theft deterrent system when PANIC is pressed and held for 0.8 seconds. ON/OFF
    WIRLS BUZZ RESP (Wireless buzzer answer-back) ON Wireless door lock buzzer response/ON or OFF ON/OFF
  5. SMART KEY SYSTEM (DOOR LOCK) 

    SMART: 

    CUSTOMIZE PARAMETERS - SMART

    Display (Item) Default Contents Setting
    PARK WAIT TIME (Wait time to permit opening door after locking) 2.5s Function that sets waiting time to permit opening door after door is locked with entry lock function. 0.5s/1.5s/2.5s/ 5.0s
    SMART UNLOCK D_DOOR Function that switches the entry unlock detection area. ALL / D_DOOR
    IGNITION AREA (SMART ignition available area) ALL Function to choose the available area for electrical key to start HV control system and cancel the steering lock. FRONT/ALL
    SMART TRUNK (Luggage compartment opening operation) ON Function to open a luggage compartment when the driver has the electrical key and presses the luggage open button. ON/OFF

    WIRELESS DOOR LOCK: 

    CUSTOMIZE PARAMETERS - WIRELESS DOOR LOCK

    Display (Item) Default Contents Setting
    ALARM FUNCTION (Panic function) ON Function to operate the theft deterrent system by keeping pressing the lock button of the transmitter for 2.5 seconds. If there is a panic button, press the panic button instead of the lock button. ON / OFF

    WARNING: 

    CUSTOMIZE PARAMETERS - WARNING

    Display (Item) Default Contents Setting
    KEY LOW-BATT WRN ON Function to set a warning function for the time when a key battery becomes weak. ON / OFF
  6. METER / GAUGE SYSTEM 

    METER: 

    CUSTOMIZE PARAMETERS - METER

    Display (Item) Default Contents Setting
    KEY REMND VOLUM LARGE Function to change the volume of the key reminder warning buzzer LARGE, MEDIUM, SMALL
    KEY REMND SOUND NORMAL Function to change the cycle of the key reminder warning buzzer FAST, NORMAL, SLOW
    SEAT-BELT WARN D/PON Function to change the setting of the seat belt buzzer D/P ON, D ON, P ON, D/P OFF

    HINT:

    This setting is only valid for the buzzer which sounds at 5 km/h (3 mph) or more.

  7. SLIDING ROOF SYSTEM 

    Sliding roof ECU 

    CUSTOMIZE PARAMETERS - SLIDING ROOF ECU

    Display (Item) Default Contents Setting
    OPEN/DOOR KEY ON Function to manually open sliding roof linked with power window if holding driver's side and passenger's side door key for 1.5 seconds or more to unlock position when power switch is off ON/OFF
    CLOSE/DOOR KEY ON Function to manually close sliding roof linked with power window if holding driver's side and passenger's side door key for 1.5 seconds or more to lock position when power switch is off ON/OFF
    OPEN/WIRELESS ON Function to manually open sliding roof linked with power window if pressing transmitter UNLOCK switch for 2.4 seconds or more when power switch is off ON/OFF
    CLOSE/WIRELESS ON Function to manually open sliding roof linked with power window if pressing transmitter LOCK switch for 2.4 seconds or more when power switch is off ON/OFF
    DOOR KEY OPER SLIDE Function to select tilt up or slide open of manual sliding roof operation linked with power window Activated by holding driver's side door key for 1.5 seconds or more to unlock position when power switch is off TILT/SLIDE
    WIRELESS OPER SLIDE Function to select tilt up or slide open of manual sliding roof operation linked with power window Activated by pressing transmitter UNLOCK switch for 2.4 seconds or more when power switch is off TILT/SLIDE
About FixVault