FixVault
Home › Toyota › 2007 › Corolla LE, Automatic › Repair and Diagnosis › Electrical › Gauges › Meter › Combination Meter › Removal

Combination Meter: Removal

  1. REMOVE METER HOOD SUB-ASSEMBLY  (See REMOVAL )
  2. REMOVE COMBINATION METER ASSEMBLY
    1. Remove the screw.
    2. Disengage the 2 claws as shown in the illustration.
    3. Disconnect the connector, then remove the combination meter assembly.
    Fig 1: Disengaging Claws
    G05196124Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault