Cruise Control Main Switch: Inspection
- INSPECT CRUISE CONTROL MAIN SWITCH
- Measure the resistance and check the results in accordance with the value(s) in STANDARD RESISTANCE REFERENCE TABLE .
Standard resistance
CRUISE CONTROL MAIN SWITCHTester Connection Switch Condition Specified Condition 1 (ECC) - 3 (CCS) Neutral 10 kΩ or higher 1 (ECC) - 3 (CCS) +/RES 216 to 264 Ω 1 (ECC) - 3 (CCS) -/SET 567 to 693 Ω 1 (ECC) - 3 (CCS) CANCEL 1,386 to 1,694 Ω 1 (ECC) - 3 (CCS) Main Switch off 10 kΩ or higher 1 (ECC) - 3 (CCS) Main Switch on Below 1 Ω If the result is not as specified, replace the cruise control main switch.
- Measure the resistance and check the results in accordance with the value(s) in STANDARD RESISTANCE REFERENCE TABLE .