FixVault

Data List/Active Test

  1. READ DATA LIST 

    HINT:

    Using the intelligent tester's DATA LIST allows a switch, sensor, actuator and other item values to be read without removing any parts. Reading the DATA LIST early in troubleshooting is one way to save time.

    1. Connect the intelligent tester with CAN VIM to the DLC3.
    2. Turn the ignition switch ON.
    3. Read the DATA LIST according to the prompts displayed on the tester.

      BODY: 

      DATA LIST (BODY)

      Item Measurement Item/Display (Range) Normal Condition Diagnostic Note
      D DOR CTY SW Driver door courtesy switch signal/ON or OFF ON: Driver door is open
      OFF: Driver door is closed
      -
      P DOR CTY SW Front passenger door courtesy switch signal/ON or OFF ON: Front passenger door is open
      OFF: Front passenger door is closed
      -
      Rr DOR CTY SW Rear door courtesy switch signal/ON or OFF ON: Either right or left rear door is open
      OFF: Both right and left rear doors are closed
      -
      LUGG COURTSY SW Back door and back window courtesy switch signal/ON or OFF ON: Either back door or back window is open
      OFF: Both back door and back window are closed
      -
      D LOCK POS SW Driver side door unlock detection switch signal/ON or OFF ON: Driver side door is unlocked
      OFF: Driver side door is locked
      -
      P LOCK POS SW Passenger side door unlock detection switch signal/ON or OFF ON: Passenger side door is unlocked
      OFF: Passenger side door is locked
      -
      Rr LOCK POS SW Back door unlock detection switch signal/ON or OFF ON: Back door is unlocked
      OFF: Back door is locked
      -
      D/L SW-LOCK Door manual lock switch signal/ON or OFF ON: Door control switch is pushed to lock position
      OFF: Door control switch is not pushed
      -
      D/L SW-UNLOCK Door manual unlock switch signal/ON or OFF ON: Door control switch is pushed to unlock position
      OFF: Door control switch is not pushed
      -
      DOR KEY SW-LOCK Door key linked lock switch signal/ON or OFF ON: Driver side door key cylinder or passenger side door key cylinder is turned to lock position
      OFF: Driver side door key cylinder or passenger side door key cylinder is not turned
      -
      D DOR KEY SW-UL Door key linked lock switch signal/ON or OFF ON: Driver side door key cylinder is turned to unlock position
      OFF: Driver side door key cylinder is not turned
      -
      P DOR KEY SW-UL Door key linked lock switch signal/ON or OFF ON: Passenger side door key cylinder is turned to unlock position
      OFF: Passenger side door key cylinder is not turned
      -

      BACK-DOOR: 

      DATA LIST (BACK-DOOR)

      Item Measurement Item/display (Range) Normal Condition Diagnostic Note
      KEY SW (LOCK) Door key linked lock switch signal/ON or OFF ON: Back door key cylinder is turned to lock position
      OFF: Back door key cylinder is not turned
      -
      KEY SW (UNLOCK) Door key linked lock switch signal/ON or OFF ON: Back door key cylinder is turned to unlock position
      OFF: Back door key cylinder is not turned
      -
  2. PERFORM ACTIVE TEST 

    HINT:

    Performing the intelligent tester's ACTIVE TEST allows relays, VSV, actuators and other items to be operated without removing any parts. Performing the ACTIVE TEST early in troubleshooting is one way to save time. The DATA LIST can be displayed during the ACTIVE TEST.

    1. Connect the intelligent tester with CAN VIM to the DLC3.
    2. Turn the ignition switch ON.
    3. Perform the ACTIVE TEST according to the prompts displayed on the tester.

      BODY: 

      ACTIVE TEST DETAIL (BODY)

      Item Test Details/Display (Range) Diagnostic Note
      DOOR LOCK Operate door lock motor LOCK/UNLOCK -