Combination Meter: Removal

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
REMOVE FRONT DOOR SCUFF PLATE LH
1. Disengage the 14 claws and remove the front door scuff plate.
  
  Fig 1: Identifying Front Door Scuff Plate Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT FLOOR FOOTREST (See REMOVAL )
REMOVE FOOTREST CLIP (See REMOVAL )
REMOVE COWL SIDE TRIM BOARD LH
1. Remove the clip.
2. Disengage the 2 claws and remove the cowl-side trim board.
  
  Fig 2: Identifying Cowl-Side Trim Board Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE INSTRUMENT PANEL GARNISH LH (See REMOVAL )
REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY (See REMOVAL )
REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY (See REMOVAL )
REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH (See REMOVAL )
REMOVE INSTRUMENT CLUSTER FINISH PANEL (See REMOVAL )
REMOVE COMBINATION METER ASSEMBLY
1. Remove the 4 screws.
  
  Fig 3: Identifying Combination Meter Assembly Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Disconnect the 2 connectors and clamp and remove the combination meter.
  
  Fig 4: Identifying Combination Meter Connectors
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002