FixVault
Home › Toyota › 2007 › FJ Cruiser 4WD, Part Time › Repair and Diagnosis › Electrical › Gauges › Meter › Meter/Gauge System › System Description

System Description

  1. METER GAUGE AND WARNING INDICATOR 

    GAUGE 

    SIGNAL DESCRIPTION - GAUGE

    Item Signal Description
    Speedometer Indicates vehicle speed based on signals received from speed sensor (Direct line)
    Tachometer Indicates engine speed based on signals from ECM (Direct line)
    ODO/TRIP meter Calculates accumulated total vehicle travel distance and vehicle travel distance since trip meter knob pressed
    Fuel Gauge Indicates fuel level in accordance with signals received from fuel sender gauge (Direct line)
    Engine Coolant Temperature Gauge Indicates engine coolant temperature in accordance with signal from ECM (Direct line)
    Volt Gauge Indicates vehicle voltage according to voltage from IG terminal (Direct line)

    WARNING/INDICATOR 

    SIGNAL DESCRIPTION - WARNING/INDICATOR

    Item Signal Description
    TURN SIGNAL Receives turn signal from flasher relay (Direct line)
    BEAM Receives beam signal from headlight dimmer switch (BEAN)
    CHARGE Receives malfunction signal from generator (Direct line)
    MIL Receives malfunction check signal from ECM (Direct line)
    DOOR Open door indicator illuminates when receiving signal from main body ECU (BEAN)
    D BELT Receives driver seat belt signal (unfastened) from center airbag sensor assembly (BEAN)
    BRAKE Receives parking brake switch signal from main body ECU (Direct line) and fluid level warning signal from brake level switch (Direct line)
    OIL PRESSURE Receives malfunction signal from oil pressure switch (Direct line)
    MAINT REQD(1) Blinks when about 4,500 miles driven since oil change. Illuminates when about 5,000 miles driven since oil change.
    AIRBAG Receives malfunction signal from center airbag sensor assembly (Direct line)
    ABS Receives malfunction signal from skid control ECU (Direct line)
    P BELT Blinks when front passenger seat belt switch ON (unfastened)
    FUEL Receives fuel empty signals from fuel sender gauge.
    CRUISE(2) Receives malfunction signal from ECM (Direct line)
    AUTO LSD(3) Receives signals from hydraulic brake booster while AUTO LSD is operating.
    VSC TRAC Receives malfunction signal from skid control ECU (Direct line)
    VSC OFF(4) Receives malfunction signal from skid control ECU (Direct line)
    SLIP Receives malfunction signal from skid control ECU (Direct line)
    ABS Receives malfunction signal from skid control ECU (Direct line)
    4WD(5) Receives signals from 4WD control ECU while 4WD is operating.
    A-TRAC(5) Receives malfunction signal from skid control ECU (Direct line)
    REAR DIFF. LOCK(4) Receives signals from 4WD control ECU while Rear Differential Lock is operating.
    (1) U.S.A. only
    (2) w/ Cruise Control
    (3) for 2WD
    (4) w/ Rear Differential Lock
    (5) for 4WD

    Buzzer 

    SIGNAL DESCRIPTION - BUZZER

    Item Signal Description
    Key Reminder Buzzer ON when ignition switch OFF, key inserted and driver door open.
    Manual Shift Reverse (6MT) Buzzer ON when ignition switch ON and shift position is reverse.
    Seat Belt Warning Buzzer ON when vehicle speed exceeds 12.4 MPH (20 km/h) and seat belt unfastened.
About FixVault