FixVault
Home › Toyota › 2007 › FJ Cruiser 4WD, Part Time › Repair and Diagnosis › Engine Performance › Engine Control System › Mass Air Flow Meter › Removal

Mass Air Flow Meter: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE V-BANK COVER  (See REMOVAL  )
  3. REMOVE MASS AIR FLOW METER 
    1. Disconnect the connector.
    2. Remove the 2 screws, then remove the mass air flow meter.
      Fig 1: Identifying Mass Air Flow Meter Screws
      G05197997Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault