FixVault
Home › Toyota › 2007 › FJ Cruiser RWD › Repair and Diagnosis › Electrical › Body Electrical › Power Outlet › Rear Power Outlet Socket › Installation

Rear Power Outlet Socket: Installation

  1. INSTALL POWER OUTLET SOCKET COVER 
    1. Connect the connector.
    2. Engage the 8 claws and install the power outlet socket cover.
      Fig 1: Identifying Power Outlet Socket Cover Claws
      G05114254Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 

    Torque: 3.9 N*m (40 kgf*cm, 35 in.*lbf) 

About FixVault