Data List / Active Test
- USING INTELLIGENT TESTER
- Connect the intelligent tester to the DLC3.
- Monitor the ECU data by following the prompts on the tester screen.
HINT:
The intelligent tester has a "Snapshot" function which records the monitored data. Refer to the intelligent tester operator's manual for further details.
- DATA LIST
HINT:
Using the DATA LIST displayed on the intelligent tester, you can read the value of the switch, sensor, actuator, etc. without parts removal. Reading the DATA LIST as the first step of troubleshooting is one way to shorten the labor time.
- Connect the intelligent tester to the DLC3.
- Turn the ignition switch ON.
- Read the DATA LIST according to the display on the tester.
D-DOOR:
DATA LIST - D-DOORTester Display Measurement Item/Range Normal Condition Diagnostic Note P/W AUTO SW Driver door power window auto switch signal/ON or OFF ON: Driver door power window auto switch operates
OFF: Driver door power window auto switch does not operate- LOCK POS SW Power window lock switch signal / ON or OFF ON: Power window lock switch in LOCK position
OFF: Power window lock switch in UNLOCK position- GLASS POS-1/4 Door glass position (Fully closed - 1/4 open) signal/OK or CAUTION OK: Power window is going UP by manual operation CAUTION: CAUTION may be displayed even when no resistance is applied in each position. In this case, there must be a foreign object stuck in that position- GLASS POS-2/4 Door glass position (1/4 open - 2/4 open) signal/OK or CAUTION OK: Power window is going UP by manual operation CAUTION: CAUTION may be displayed even when no resistance is applied in each position. In this case, there must be a foreign object stuck in that position- GLASS POS-3/4 Door glass position (2/4 open - 3/4 open) signal/OK or CAUTION OK: Power window is going UP by manual operation CAUTION: CAUTION may be displayed even when no resistance is applied in each position. In this case, there must be a foreign object stuck in that position- GLASS POS-OPEN Door glass position (3/4 open - Fully open) signal/OK or CAUTION OK: Power window is going UP by manual operation CAUTION: CAUTION may be displayed even when no resistance is applied in each position. In this case, there must be a foreign object stuck in that position- UP/DOOR KEY Door key-linked power window UP signal/AVAIL or NOT AVL AVAIL: Door key-linked power window UP is available
NOT AVL: Door key-linked power window UP is unavailable- DOWN/DOOR KEY Door key-linked power window DOWN signal/AVAIL or NOT AVL AVAIL: Door key-linked power window DOWN is available
NOT AVL: Door key-linked power window DOWN is unavailable-
- ACTIVE TEST
HINT:
Performing the ACTIVE TEST using the intelligent tester allows you to operate the relay, VSV, actuator, etc. without parts removal. Performing the ACTIVE TEST as the first step of troubleshooting is one way to shorten the labor time. It is possible to display the DATA LIST during the ACTIVE TEST.