Charging System (3MZ-FE): Generator: Installation

INSTALL GENERATOR ASSEMBLY
1. Temporarily install the generator with bolts A and B.
  
  Fig 1: Locating Generator And Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Adjust the V belt tension by tightening bolt C (See INSTALLATION ).
3. Tighten bolts A and B.
  Torque:
  
  Bolt A
  
  58 N*m (592 kgf*cm, 43 ft.*lbf)
  
  Bolt B
  
  18 N*m (184 kgf*cm, 13 ft.*lbf)
  
  Fig 2: Tightening Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Connect the generator wire with the nut.
  Torque: 9.8 N*m (100 kgf*cm, 7.0 ft.*lbf)
5. Connect the generator connector.
6. Install the wire harness clamp.
INSPECT V BELT (See ON-VEHICLE INSPECTION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL