FixVault
Home › Toyota › 2007 › Highlander Limited, AWD › Repair and Diagnosis › Engine Performance › Engine Control System (3MZ-FE) (Except Hybrid) › Accelerator Pedal Rod › Installation

Accelerator Pedal Rod: Installation

  1. INSTALL ACCELERATOR PEDAL ROD ASSEMBLY 
    1. Install the pedal rod with the 2 bolts.

      Torque: 4.9 N.m (50 kgf*cm, 43 in.*lbf) 

    2. Connect the accelerator pedal position sensor connector.
      Fig 1: Locating Pedal Rod With Bolts
      G05245500Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault