FixVault
Home › Toyota › 2007 › Highlander Limited, AWD › Repair and Diagnosis › External Pages › Different variant/trim › Section 39 (Brake Control System - Hybrid) › Steering Angle Sensor › Inspection

Steering Angle Sensor: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. INSPECT STEERING ANGLE SENSOR 
    1. Inspect the steering angle sensor. If any of the following occurs, replace with a new steering angle sensor:
      • The surface of the steering angle sensor is cracked, dented, or chipped off.
      • The connector is scratched, cracked, or damaged.
      • The steering angle sensor has been dropped.
About FixVault