Data List/Active Test

HINT:

By the DATA LIST displayed on the intelligent tester, you can read the value of the switch, sensor, actuator and so on without removing any parts. Reading the DATA LIST as a first step of troubleshooting is one of the method to shorten the labor time.

1. Connect the intelligent tester (with CAN VIM) to the DLC3.
2. Turn the ignition switch ON.
3. Read the "DATA LIST" according to the display on the tester.

   Body ECU: 

   DATA LIST (BODY ECU)
   
   

   Item	Measurement Item/Display (Range)	Normal Condition	Diagnostic Note
   KEY UNLOCK WRN SW	Key unlock warning SW signal	ON: Key is in ignition key cylinder OFF: Key is not in ignition key cylinder	-
   D DOR CTY SW	Driver's door courtesy SW signal	ON: Driver's door is open OFF: Driver's door is closed	-