FixVault
Home › Toyota › 2007 › Land Cruiser › Repair and Diagnosis › Body & Frame › Door Locks › Door Lock › Power Door Lock Control System › Customize Parameters

Customize Parameters

  1. CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER (REFERENCE) 

    HINT:

    The following items can be customized.

    NOTE:
    • When the customer requests a change in a function, first make sure that the function can be customized.
    • Be sure to make a note of the current settings before customizing.
    • When troubleshooting a function, first make sure that the function is set to the default setting.

    Door lock 

    CUSTOMIZE PARAMETERS (DOOR LOCK)

    DISPLAY (ITEM) DEFAULT CONTENTS SETTING
    UNLOCK / PARK (#)
    (Unlock w/IG ON, shift P, speed 0)    		 OFF Function to unlock the doors by shifting the lever to P range from other than P range when the ignition switch is ON. ON / OFF
    ALL UNLK / OPN-CL (#)
    (All unlock w/D door open-close)    		 OFF Function to unlock all the other doors when opening the driver's door within 10 seconds after turning the ignition switch from OFF to ON. ON / OFF
    UNLK / KEY TWICE
    (Unlock w/2 times D key operation)    		 ON Function to unlock only the driver's door by performing the key operation once and to unlock all the doors by performing it twice. In the OFF setting, operating the key "UNLOCK" once unlocks all of the doors. ON / OFF
    AUTO LOCK
    (Auto Lock)    		 OFF Function to lock the door when the vehicle speed reaches a certain speed. ON / OFF
About FixVault