Inspection Procedure

HINT:

When using the intelligent tester, start from  1. When not using the intelligent tester, start from  2.

1. READ VALUE OF INTELLIGENT TESTER (DOOR KEY LOCK AND UNLOCK SWITCH) 
   1. Check the DATA LIST for proper functioning of the door key lock and unlock operation.
   • OK: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN  PROBLEM SYMPTOMS TABLE  
   • NG: GO TO NEXT STEP 
2. INSPECT DOOR KEY LOCK AND UNLOCK SWITCH 
   1. Inspect the front door key lock and unlock switch (see INSPECTION  ).
   • NG: REPLACE DOOR KEY LOCK AND UNLOCK SWITCH 
   • OK: GO TO NEXT STEP 
3. CHECK WIRE HARNESS (SWITCH - BODY ECU) 
   • NG: REPAIR OR REPLACE HARNESS AND CONNECTOR 
   • OK: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN  PROBLEM SYMPTOMS TABLE