Inspection Procedure

HINT:

When using the intelligent tester, start from  1. When not using the intelligent tester, start from  2.

1. READ VALUE OF INTELLIGENT TESTER (DOOR LOCK CONTROL SWITCH) 
   1. Check the DATA LIST for proper functioning of the door lock control switch operation.
   • OK: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN  PROBLEM SYMPTOMS TABLE  
   • NG: GO TO NEXT STEP 
2. INSPECT DOOR LOCK CONTROL SWITCH 
   1. Inspect the door lock control switch (see INSPECTION  ).
   • NG: REPLACE DOOR LOCK CONTROL SWITCH 
   • OK: GO TO NEXT STEP 
3. CHECK WIRE HARNESS (CONTROL SWITCH - BODY ECU (MAIN)) 
   • NG: REPAIR OR REPLACE HARNESS AND CONNECTOR 
   • OK: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN  PROBLEM SYMPTOMS TABLE