Inspection Procedure

HINT:

When using the intelligent tester, start from  1. When not using the intelligent tester, start from  2.

1. READ VALUE OF INTELLIGENT TESTER (UNLOCK DETECTION SWITCH) 
   1. Check the DATA LIST for proper functioning of the unlock detection switch operation.
   • OK: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN  PROBLEM SYMPTOMS TABLE  
   • NG: GO TO NEXT STEP 
2. INSPECT DOOR UNLOCK DETECTION SWITCH 
   1. Inspect front door unlock detection switch (see INSPECTION  ).
   2. Inspect rear door unlock detection switch (see INSPECTION  ).
   • NG: REPLACE DOOR LOCK 
   • OK: GO TO NEXT STEP 
3. CHECK WIRE HARNESS (DETECTION SWITCH - BODY ECU AND MASTER SWITCH) 
   • NG: REPAIR OR REPLACE HARNESS AND CONNECTOR 
   • OK: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN  PROBLEM SYMPTOMS TABLE