Torsion Bar Spring: Removal

REMOVE FRONT WHEEL
REMOVE ENGINE UNDER COVER
REMOVE TORSION BAR SPRING
1. Place matchmarks on the torsion bar spring, anchor arm and torque arm.
  
  Fig 1: Placing Matchmarks On Torsion Bar Spring, Anchor Arm & Torque Arm
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Measure the dimension "A" between the anchor arm adjusting bolt end of the frame as shown.
  HINT:
  
  Use the measure for a reference when installing the anchor arm.
  
  Fig 2: Measuring Dimension A Between Anchor Arm Adjusting Bolt End Of Frame
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Loosen the anchor arm bolt until the spring tension is free and measurement the anchor arm bolt dimension "B".
  HINT:
  
  Use the measurement for a reference when installing the anchor arm.
4. Remove the anchor arm adjusting bolt, anchor arm swivel and anchor arm adjusting seat.
5. Remove the torsion bar spring with the anchor arm.
6. Remove the anchor arm from the torsion bar spring.
  
  Fig 3: Measuring Anchor Arm Bolt Dimension B
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT SUSPENSION TORQUE ARM
1. Remove the 2 nuts, bolt and torque arm.