Floor Shift Assembly: Removal

REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY CENTER
HINT:

(See REMOVAL )
REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY CTR
HINT:

(See REMOVAL )
REMOVE INSTRUMENT PANEL BOX
HINT:

(See REMOVAL )
REMOVE INSTRUMENT PANEL FINISH PANEL LOWER CENTER
HINT:

(See REMOVAL )
DISCONNECT FLOOR SHIFT PARKING LOCK CABLE ASSEMBLY
1. Push the claw and disconnect the parking lock cable assembly from the shift lock release link.
  
  Fig 1: Locating Floor Shift Parking Lock Cable Claw
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Using a screwdriver, disconnect the parking lock cable assembly from the shift lever plate.
  HINT:
  
  Tape up the screwdriver tip before use.
  
  Fig 2: Locating Shift Lever Plate
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY
1. Disconnect the control cable end from the shift lever.
  
  Fig 3: Identifying Control Cable End
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Using a screwdriver, disconnect the control cable from the shift lever plate.
  HINT:
  
  Tape up the screwdriver tip before use.
  
  Fig 4: Locating Shift Lever Plate
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FLOOR SHIFT ASSEMBLY
1. Disconnect the shift lock control ECU connector and indicator lamp wire connector.
2. Disconnect the wire harness clamp.
  
  Fig 5: Locating Shift Lock Control ECU Connector And Indicator Lamp Wire Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the 4 nuts and floor shift assembly.
  
  Fig 6: Locating Floor Shift Assembly Nuts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002