FixVault
Home › Toyota › 2007 › Matrix Base, Automatic › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission - A246E › Oil Pump › Reassembly

Oil Pump: Reassembly

  1. INSTALL FRONT OIL PUMP DRIVEN GEAR 
    1. Make sure the top of the front oil pump driven gear are facing upward.
    Fig 1: Identifying Front Oil Pump Driven Gear
    G05193994Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL FRONT OIL PUMP DRIVE GEAR 
    1. Make sure the top of the front oil pump drive gear are facing upward.
  3. INSTALL FRONT OIL PUMP OIL SEAL 
    1. Using SST and a hammer, install a new front oil pump oil seal. The seal end should be flush with the outer edge of the pump body.

      SST 09350-32014 (09351-32140) 

      Fig 2: Installing Front Oil Pump Oil Seal
      G05194002Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSTALL STATOR SHAFT ASSEMBLY 
    1. Align the bolt holes of the stator shaft assembly with those of the pump body.
    2. Torque the 11 bolts.

      Torque: 9.8 N*m (99 kgf*cm, 86 in.*lbf) 

      Fig 3: Identifying Stator Shaft Assembly Bolts
      G05193992Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. INSTALL STATOR SHAFT CLUTCH DRUM THRUST WASHER 
    1. Coat the stator shaft clutch drum thrust washer with petroleum jelly.
    2. Align the tab of the stator shaft clutch drum thrust washer with the hollow of the front oil pump body.
      Fig 4: Installing Stator Shaft Clutch Drum Thrust Washer
      G05193991Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. INSTALL CLUTCH DRUM OIL SEAL RING 
    1. Install the 2 clutch drum oil seal rings to the stator shaft back side.
      NOTE: Do not spread the ring ends more than necessary.

      HINT:

      After installing the clutch drum oil seal rings, check that they move smoothly.

      2. Fig 5: Installing Clutch Drum Oil Seal Ring
      G05194005Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. INSPECT OIL PUMP ASSEMBLY (See  INSPECTION   ) 
About FixVault