FixVault
Home › Toyota › 2007 › Matrix Base, Automatic › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission - A246E › Planetary Ring Gear › Disassembly

Planetary Ring Gear: Disassembly

  1. REMOVE PLANETARY SUN GEAR SUB-ASSEMBLY 
    1. Using snap ring pliers, remove the snap ring from the planetary sun gear sub-assembly.
    2. Remove the planetary sun gear sub-assembly from the sun gear input drum.
      Fig 1: Removing Snap Ring From Planetary Sun Gear Sub-Assembly
      G05194015Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE SUN GEAR INPUT DRUM SHAFT SNAP RING 
    1. Using snap ring pliers, remove the sun gear input drum shaft snap ring from the planetary sun gear sub-assembly.
      Fig 2: Removing Sun Gear Input Drum Shaft Snap Ring
      G05194016Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE FRONT PLANETARY RING GEAR FLANGE HOLE SNAP RING 
    1. Using a screwdriver, remove the front planetary ring gear flange hole snap ring from the front planetary ring gear.
      Fig 3: Removing Front Planetary Ring Gear Flange Hole Snap Ring
      G05194017Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE FRONT PLANETARY RING GEAR FLANGE SUB-ASSEMBLY 
    1. Remove the front planetary ring gear flange sub-assembly from the front planetary ring gear.
    Fig 4: Removing Front Planetary Ring Gear Flange Sub-Assembly
    G05194018Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. INSPECT PLANETARY SUN GEAR SUB-ASSEMBLY (See  INSPECTION   ) 
  6. INSPECT FRONT PLANETARY RING GEAR FLANGE SUB-ASSEMBLY (See  INSPECTION   ) 
About FixVault