FixVault
Home › Toyota › 2007 › Matrix Base, Automatic › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission - A246E › Planetary Ring Gear › Reassembly

Planetary Ring Gear: Reassembly

  1. INSTALL FRONT PLANETARY RING GEAR FLANGE SUB-ASSEMBLY 
    1. Position the front planetary ring gear flange sub-assembly on to the front planetary ring gear.
      Fig 1: Installing Front Planetary Ring Gear Flange Sub-Assembly
      G05194018Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL FRONT PLANETARY RING GEAR FLANGE HOLE SNAP RING 
    1. Using a screwdriver, install the front planetary ring gear flange hole snap ring to the front planetary ring gear.
      Fig 2: Installing Front Planetary Ring Gear Flange Hole Snap Ring
      G05194017Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL SUN GEAR INPUT DRUM SHAFT SNAP RING 
    1. Using snap ring pliers, install the sun gear input drum shaft snap ring to the planetary sun gear sub-assembly.
      Fig 3: Installing Sun Gear Input Drum Shaft Snap Ring
      G05194016Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSTALL PLANETARY SUN GEAR SUB-ASSEMBLY 
    1. Install the planetary sun gear sub-assembly to the sun gear input drum.
    2. Using snap ring pliers, install the snap ring to the planetary sun gear sub-assembly.
      Fig 4: Installing Snap Ring To Planetary Sun Gear Sub-Assembly
      G05194024Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault