FixVault
Home › Toyota › 2007 › Matrix Base, Standard › Repair and Diagnosis › Body & Frame › Door Locks › Door Lock › Rear Door Lock › Inspection

Rear Door Lock: Inspection

  1. INSPECT REAR DOOR LOCK ASSEMBLY LH 
    1. Apply battery voltage and inspect the door lock motor operation, as shown in the illustration and table.

      Standard 

      MEASURING CONDITION CHART

      Measuring condition Specified Condition
      Battery positive (+) → Terminal 4
      Battery negative (-) → Terminal 1      		 Lock
      Battery positive (+) → Terminal 1
      Battery negative (-) → Terminal 4      		 Unlock

      If the result is not as specified, replace the door lock assembly.

      Fig 1: Inspecting Rear Door Lock Assembly LH
      G05196057Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSPECT REAR DOOR LOCK ASSEMBLY RH 
    1. Apply battery voltage and inspect the door lock motor operation, as shown in the illustration and table.

      Standard 

      MEASURING CONDITION CHART

      Measuring condition Specified Condition
      Battery positive (+) → Terminal 4
      Battery negative (-) → Terminal 1      		 Lock
      Battery positive (+) → Terminal 1
      Battery negative (-) → Terminal 4      		 Unlock

      If the result is not as specified, replace the door lock assembly.

      Fig 2: Inspecting Door Lock Motor Operation
      G05196058Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault