FixVault
Home › Toyota › 2007 › Prius Base › Repair and Diagnosis › Body & Frame › Door Locks › Door Lock › Smart Key System › Data List / Active Test

Data List / Active Test

  1. READ DATA LIST 

    HINT:

    Using the intelligent tester's DATA LIST allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the DATA LIST early in troubleshooting is one way to save time.

    1. Connect the intelligent tester (with CAN VIM) to the DLC3.
    2. Turn the power switch ON (IG) and press the intelligent tester main switch ON.
    3. Read the DATA LIST according to the display on the tester.

      Certification ECU 

      CERTIFICATION ECU DATA LIST

      Item Measurement Item/Range (Display) Normal Condition Diagnostic Note
      D TOUCH SENSOR D-door touch sensor/
      ON or OFF      		 ON: Sensor is being touched
      OFF: Sensor is not being touched      		  
      P TOUCH SENSOR P-door touch sensor/
      ON or OFF      		 ON: Sensor is being touched
      OFF: Sensor is not being touched      		  
      D TRIGGER SW D-door trigger switch/
      ON or OFF      		 ON: Lock switch is being pushed
      OFF: Lock switch is not being pushed      		  
      P TRIGGER SW P-door trigger switch/
      ON or OFF      		 ON: Lock switch is being pushed
      OFF: Lock switch is not being pushed      		  
      TR/B-DOOR LOCK Trunk/Back-door lock switch/
      ON or OFF      		 ON: Back door lock switch is being pushed
      OFF: Back door lock switch is not being pushed      		  
      SMART CANCEL SW Key cancel switch/
      ON or OFF      		 ON: Key cancel switch is ON
      OFF: Key cancel switch is OFF      		  
      KEY UNLK WRN SW Key unlock warning switch/
      ON or OFF      		 ON: Key is in key slot
      OFF: No key is in key slot      		  
      IG SW Power switch/
      ON or OFF      		 ON: Power switch is ON (IG)
      OFF: Power switch is OFF      		  
  2. PERFORM ACTIVE TEST 

    HINT:

    Performing the intelligent tester's ACTIVE TEST allows relay, VSV, actuator and other items to be operated without removing any parts. Performing the ACTIVE TEST early in troubleshooting is one way to save time. The DATA LIST can be displayed during the ACTIVE TEST.

    1. Connect the intelligent tester (with CAN VIM) to the DLC3.
    2. Turn the power switch ON (IG) and press the intelligent tester main switch ON.
    3. Perform the ACTIVE TEST according to the display on the tester.

      Certification ECU 

      CERTIFICATION ECU ACTIVE TEST

      Item Test Details Diagnostic Note
      D TRANSMITTER Driver side transmitter
      ON / OFF      		  
      P TRANSMITTER Front passenger side transmitter
      ON / OFF      		  
      FR TRANSMITTER Indoor electrical key oscillator (front)
      ON / OFF      		  
      IN BDR TRNSMTTR Back door inner transmitter
      ON / OFF      		  
      BDOOR TRNSMTTR Back door outer transmitter
      ON / OFF      		  
      D SELECT SIG Driver side select
      ON / OFF      		  
      P SELECT SIG Front passenger side select
      ON / OFF      		  
About FixVault