FixVault
Home › Toyota › 2007 › Prius Base › Repair and Diagnosis › Body & Frame › Door Locks › Door Lock › WIRELESS DOOR LOCK CONTROL SYSTEM (w/ Smart Key System) › Data List / Active Test

Data List / Active Test

  1. READ DATA LIST 

    HINT:

    Using the intelligent tester's DATA LIST allows switch, actuator and other item values to be read without removing any parts. Reading the DATA LIST early in troubleshooting is one way to save time.

    1. Connect the intelligent tester (with CAN VIM) to the DLC3.
    2. Turn the power switch ON (IG).
    3. Read the DATA LIST.

      Main body ECU: 

      MAIN BODY ECU DATA LIST

      Item Measurement Item / Display (Range) Normal Condition Diagnostic Note
      D DOR CTY SW Driver side door courtesy switch signal / ON or OFF ON: Driver side door is open
      OFF: Driver side door is closed      		 -
      P DOR CTY SW Passenger side door courtesy switch signal / ON or OFF ON: Passenger side door is open
      OFF: Passenger side door is closed      		 -
      Rr DOR CTY SW Rear door courtesy switch signal / ON or OFF ON: Either right or left door is open
      OFF: Both right and left doors are closed      		 -
      D LOCK POS SW Driver side door lock position switch signal / ON or OFF ON: Driver side door lock is in unlock position
      OFF: Driver side door lock is in lock position      		 -
      P LOCK POS SW Passenger side door lock position switch signal / ON or OFF ON: Passenger side door lock is in unlock position
      OFF: Passenger side door lock is in lock position      		 -
      Rr LOCK POS SW Rear door lock position switch signal / ON or OFF ON: Rear door lock is in unlock position
      OFF: Rear door lock is in lock position      		 -
      REGIST ID CODE Number of registered ID / Min. 0, Max. 4 Number of registered ID codes -

      Transponder key ECU: 

      TRANSPONDER KEY ECU DATA LIST

      Item Measurement Item / Display (Range) Normal Condition Diagnostic Note
      KEY UNLK WRN SW Halfway switch signal / ON or OFF ON: Key is in key slot.
      OFF: No key is in key slot.      		 -
  2. PERFORM ACTIVE TEST 

    HINT:

    Performing the intelligent tester's ACTIVE TEST allows relay, VSV, actuator, and other items to be operated without removing any parts. Performing the ACTIVE TEST early in troubleshooting is one way to save time. The DATA LIST can be displayed during the ACTIVE TEST.

    1. Connect the intelligent tester (with CAN VIM) to the DLC3.
    2. Turn the power switch ON (IG).
    3. Perform the ACTIVE TEST according to the display on the tester.

      Main body ECU: 

      MAIN BODY ECU ACTIVE TEST

      Item Test Details Diagnostic Note
      HAZARD Turns turn signal flasher relay ON / OFF -
      TRUNK/BDOR OPEN Operate back door motor ON / OFF -
      DOOR LOCK Operate door lock motor for all doors OFF / LOCK / UNLOCK All doors are closed
About FixVault