FixVault
Home › Toyota › 2007 › Prius Base › Repair and Diagnosis › Electrical › Body Electrical › Clock, Telltale Light, And Power Outlet Sockets › Clock › Installation

Clock, Telltale Light, And Power Outlet Sockets: Clock: Installation

  1. INSTALL CLOCK ASSEMBLY 
    1. Attach the 2 claws to install the clock.
    Fig 1: Installing Clock
    G04476717Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL MULTI-DISPLAY ASSEMBLY 
  3. INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY (see  INSTALLATION  ) 
  4. INSTALL UPPER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (See  INSTALLATION  ) 
  5. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (See  INSTALLATION  ) 
  6. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY (See  INSTALLATION  ) 
  7. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY (See  INSTALLATION  ) 
  8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  9. PERFORM INITIALIZATION 
    1. Perform initialization (see INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
  10. CHECK SRS WARNING LIGHT 
    1. Check the SRS warning light (see DIAGNOSIS SYSTEM ).
About FixVault