Power Switch: Inspection

INSPECT POWER SWITCH

Measure the resistance of the switch.

Standard resistance

RESISTANCE TESTER CONNECTION SPECIFICATION

Tester Connection	Switch Condition	Specified Condition
7 (SS2) - 6 (GND)	Pushed	Below 1 Ω
5 (SS1) - 6 (GND)	Pushed	Below 1 Ω
7 (SS2) - 6 (GND)	Released	10 kΩ or higher
5 (SS1) - 6 (GND)	Released	10 kΩ or higher

Fig 1: Measuring Resistance Of Power Switch

G04473243

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

If the resistance is not as specified, replace the power switch.