Torque Specifications
TORQUE SPECIFICATIONS
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Spark plug at Cylinder head | 18 | 184 | 13 |
| Ignition coil at Cylinder head cover | 9.0 | 92 | 80 in.*lbf |
| Idler pulley at Adjust bolt | 40 | 408 | 30 |
| No. 1 air cleaner inlet at Clamp | 3.0 | 31 | 27 |
| No. 2 camshaft bearing cap at Cylinder head | 13 | 130 | 9.6 |
| No. 1 camshaft bearing cap at Cylinder head | 23 | 235 | 17 |
| Camshaft timing sprocket at No. 2 camshaft | 64 | 653 | 47 |
| Screw plug at Timing chain cover | 15 | 153 | 11 |
| Chain vibration damper at Cylinder block | 9.0 | 92 | 80 in.*lbf |
| Chain tensioner slipper at Cylinder block | 9.0 | 92 | 80in.*lbf |
| Chain tensioner at Cylinder block | 9.0 | 92 | 80 in.*lbf |
| Engine mounting bracket at Timing chain cover | 55 | 561 | 41 |
| Engine mounting spacer at Body | 55 | 561 | 41 |
| Engine mounting insulator RH at Engine mounting bracket | 52 | 530 | 38 |
| Crankshaft pulley at Crankshaft | 128 | 1,305 | 95 |
| Cylinder head cover at Cylinder head | 10 | 102 | 74 |
| Wire harness at Cylinder head cover | 9.0 | 92 | 80 in.*lbf |
| Windshield washer jar at Body Bolt A: |
4.9 | 50 | 43 in.*lbf |
| Windshield washer jar at Body Bolt B: |
14 | 143 | 10 |
| Windshield washer jar at Body Nut: |
5.5 | 56 | 49 in.*lbf |
| Reservoir bracket at Body | 8.5 | 87 | 75 in.*lbf |
| Brake master cylinder reservoir at Reservoir bracket | 8.5 | 87 | 75 in.*lbf |
| Air cleaner assembly at Cylinder head cover Bolt: |
7.0 | 71 | 62 in.*lbf |
| Air cleaner assembly at Cylinder head cover Clamp: |
3.0 | 31 | 27 in.*lbf |
| Oil control valve filter at Cylinder head | 30 | 306 | 22 |
| No. 1 taper screw plug at Cylinder head | 44 | 449 | 33 |
| Cylinder head at Cylinder block | 1st: 29 | 1st: 296 | 1st: 21 |
| 2nd: 90° | 2nd: 90° | 2nd: 90° | |
| 3rd: 90° | 3rd: 90° | 3rd: 90° | |
| Oil dipstick guide at Intake manifold | 9.0 | 92 | 80 in.*lbf |
| Water bypass pipe at Cylinder head | 9.0 | 92 | 80 in.*lbf |
| Engine coolant temperature sensor at Cylinder head | 20 | 204 | 15 |
| Noise filter at Cylinder head | 9.0 | 92 | 80 in.*lbf |
| Exhaust manifold at Cylinder head | 27 | 275 | 20 |
| No. 1 exhaust manifold heat insulator at Exhaust manifold | 8.0 | 82 | 71 in.*lbf |
| Knock sensor wire bracket at Cylinder head | 9.0 | 92 | 80 |
| Flywheel at Crankshaft | 49 | 500 | 36 |
| Transmission input damper at Flywheel | 20 | 204 | 15 |
| Starter hole insulator at Hybrid vehicle transaxle | 32 | 326 | 24 |
| Engine mounting insulator bracket LH at Engine mounting insulator LH | 80 | 816 | 59 |
| Front suspension crossmember at Body Bolt A: |
113 | 1,152 | 83 |
| Front suspension crossmember at Body Bolt B: |
157 | 1,602 | 116 |
| Engine moving control rod at Front suspension crossmember | 56 | 571 | 41 |
| Engine moving control rod at Hybrid vehicle transaxle | 100 | 1,020 | 74 |
| Steering sliding yoke at Steering gear | 35 | 357 | 26 |
| Compressor at Cylinder block | 25 | 255 | 18 |
| Purge VSV at Engine mounting insulator RH | 7.5 | 76 | 5.5 in.*lbf |
| Front wheel at Front axle | 103 | 1,050 | 76 |
| Connecting rod cap at Connecting rod | 1st: 15 | 1st: 153 | 1st: 11 |
| 2nd: 90° | 2nd: 90° | 2nd: 90° | |
| Crankshaft bearing cap at Cylinder block | 1st: 22 | 1st: 224 | 1st: 16 |
| 2nd: 90° | 2nd: 90° | 2nd: 90° | |
| Stud bolt at Cylinder block | 5.0 | 51 | 44 |
| Oil pan at Cylinder block | 24 | 245 | 18 |
| Oil strainer at Oil pan | 11 | 112 | 8.1 |
| No. 2 oil pan at Oil pan | 9.0 | 92 | 80 in.*lbf |
| Drain plug at No. 2 oil pan | 37.5 | 382 | 28 |
| Oil filter union at Oil pan | 30 | 306 | 22 |
| Oil filter at Oil filter union | 17.5 | 178 | 13 |
| Camshaft timing gear at Camshaft | 64 | 653 | 47 |
| Camshaft position sensor at Cylinder head | 8.0 | 82 | 71 in.*lbf |
| Timing chain cover at Cylinder head and cylinder block | Bolt A: 24 | Bolt A: 245 | Bolt A: 18 |
| Bolt B: 11 | Bolt B: 112 | Bolt B: 8.1 | |
| Bolt C: 11 | Bolt C: 112 | Bolt C: 8.1 | |
| Nut D: 24 | Nut D: 245 | Nut D: 18 | |
| Bolt E: 24 | Bolt E: 245 | Bolt E: 18 | |
| Water pump at Timing chain cover | 11 | 112 | 8 |
| Engine mounting bracket at Timing chain cover | 55 | 561 | 41 |
| Water pump pulley at Water pump | 15 | 153 | 11 |
| Fuel delivery pipe at Cylinder head | Bolt A: 19 | Bolt A: 194 | Bolt A: 14 |
| Bolt B: 9.0 | Bolt B: 92 | Bolt B: 80 in.*lbf | |
| Camshaft timing control valve at Cylinder head | 7.5 | 76 | 66 |
| Cylinder head cover at Cylinder head | 10 | 102 | 7 |
| Ventilation valve at Cylinder head cover | 27 | 275 | 20 |
| Crankshaft position sensor at Timing chain cover | 7.5 | 76 | 20 |
| Water inlet at Cylinder block | 9.0 | 92 | 80 |